Throw this storage cover over your R-Pod trailer to protect it from rain and snow while you're storing it in between camping trips. The cover secures with the integrated straps and adjustable tension panels so it won't flap in the wind.
Features:
Specs:
You're worried about your R-pod trailer getting wet and dirty in storage before your next camping trip. Whether you're storing your trailer in the rainy northwest, snowy north, or humid south, this weather-resistant cover is designed for use in extremely wet climates so your trailer will be protected. When you keep your trailer covered, you are less likely to need to wash and wax it in between trips. And if you want to trade your trailer in for a newer model later down the road, this cover will help maintain that resale value.
The 3-ply PolyPro top panel has moisture-wicking technology that vents condensation away to reduce moisture buildup that can damage your trailer over time. It also beads water when it rains to stop it from pooling or freezing, which eliminate the black streaks and corrosion you tend to see on the sides and roof of your trailer. And when the rain stops, the fabric dries quickly in mild sunlight to minimize the development of mold and mildew.
How to Measure Your R-Pod Trailer
To determine if this cover will work for you, measure the overall length of your trailer from the very front of the trailer to the rear bumper. The cover isn't meant to fit over the trailer tongue or any propane tanks or battery boxes you might have in the front, so don't include those in your measurements. Then measure the overall height from the bottom of the chassis to the top of your trailer. Do not include any AC units, vents, or antennas in your height measurement, as the cover is already designed to accommodate them.
Securing the Cover to Your Trailer
First unroll the cover and carefully spread it evenly around your trailer, making sure you don't pull too hard and tear the fabric. When you're putting the cover on your RV, the brand logo should be positioned at the front of your rig.
Once the cover is in place, wrap the elasticized hem on the cover around the bottom corners of your trailer to remove any excess slack in the material. Adjust the tension panels on the front and rear of the cover with the cinch straps until the cover fits snugly around the contours of your trailer. Then toss the weighted straps underneath your trailer to the other side and buckle them together, which keeps the cover secure and prevents it from flapping in the wind and damaging the paint job. The tension panels will help reduce the stress on the cover while you're tightening the straps.
And if you still need to winterize, you can use the zippered panel on the passenger's side to easily access the interior of your trailer without having to completely remove the cover. You can also unzip the panel on the back of the trailer so you can reach into the rear hatch.
California residents: click here
Great product, just as described!!
Very fast service and delievery.
Do you have a question about this RV Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.